Basalt mount holding an Insta360 selfie stick against a ski pole
Basalt — Pole Mount System

THE MOUNT THAT
DOESN'T LET GO.

A reinforced Insta360-to-ski-pole mount, built after the official one let riders down on real mountains. More material exactly where it counts — so your camera comes home with you.

FITS INSTA360 85 / 100 / 114 STICK·INCLUDES MOUNT KIT FOR 14–18MM POLES
Select your stick →See how it holds
Why this exists

The official mount wasn't built for impact.

Insta360 sells its own ski-pole mount. Riders report the same failure repeatedly: a hard knock, a caught edge, a fall — and the clip lets go, sometimes with the stick and camera still attached.

01 — REPORTED PATTERN

The stock mount is a single thin plastic flex-point. Riders across forums describe it separating on the first real hit, not a slow wear failure.

02 — WHAT'S AT STAKE

When it lets go, it's not just the mount — the stick and an Insta360 camera can go with it. That's a real dollar loss, on a slope you're not climbing back down to search.

03 — WHERE THIS CAME FROM

Basalt started as a fix for exactly this: more structure at the one point that was flexing, without changing how the setup mounts or feels.

Field reports paraphrased from public rider discussion — not verbatim quotes.

How it holds

Two grips. One shared idea.

A rigid shell for structure, a soft liner exactly where it touches your gear. The same principle, applied twice — once for the stick, once for the pole.

Locking ring and shim inserts for the pole-side clampABC
STICK SIDE

Screw-adjustable collar

Grips the Insta360 shaft directly. Ribbed for hand-tightening, sized to the stick's actual bore — 23mm across the 85/114cm sticks, 25mm on the slightly thicker 100cm.

POLE SIDE

Locking ring + shim

A rubber-lined ring clamps the pole; interchangeable shims add wall thickness to dial in friction across 14–18mm. Every order ships with the full set — no size to pick at checkout.

  • ALocking ring — rubber-lined bore
  • BShim insert — tunes clamp friction
  • CRivet mount — ties to the pole strap
PACKAGING

[Placeholder] Every Basalt mount ships in environmentally-friendly packaging, chosen to keep postage impact as low as the product itself is built to last — full material details to come.

Spec & compatibility

Numbers, not adjectives.

Material — shellReinforced polymer
Material — linerRubber
WeightPending final QA
Load ratingLab data at launch

Stick-side fitment — required at checkout

Insta360 85cm Selfie Stick23mm
Insta360 114cm Selfie Stick23mm
Insta360 100cm Selfie Stick25mm

Other sticks/diameters are not supported — pick yours by model, we map it to the right bore.

Pole-side kit — included, no selection needed

Ring — small14mm
Ring — medium16mm
Ring — large18mm

Covers most poles on the market. We recommend measuring your pole's diameter (or circumference ÷ π) to confirm it's in range before ordering.

Side by side

Drag to compare the grip.

Schematic, not photography — the point is contact area and where the load actually travels.

TYPICAL CLIPBASALT
Attribute
Official mount
Basalt
Contact structure
Single flex point
Wraparound clamp
Cushioning
Bare plastic
Rubber-lined
Failure mode reported
Snaps under impact
Built for this case
See it mounted

Two minutes, start to finish.

MOUNTING DEMO — VIDEO IN PRODUCTION
Reviews

From the people testing it.

★★★★★

"Lost a camera to the official mount two seasons ago. This one hasn't budged once, even after a proper fall on ice."

EARLY TESTER — RESORT SKIER
SAMPLE COPY — REPLACE WITH REAL REVIEW
★★★★★

"Bulkier than the original, no question — but I stopped noticing after run one. Worth the trade."

EARLY TESTER — BACKCOUNTRY
SAMPLE COPY — REPLACE WITH REAL REVIEW
★★★★★

"Shim system took thirty seconds to get right on my poles. Solid once it's on."

EARLY TESTER — SNOWBOARD
SAMPLE COPY — REPLACE WITH REAL REVIEW
Make it yours

Every part, your call.

Cap, main body, locker, screw cap — an independent color for each one, configured entirely by you.

Italy-themed Basalt mount
Italy
Unique design available
France-themed Basalt mount
France
Unique design available
Support

Fitting, warranty, questions.

Which Insta360 stick does this fit?

The 85cm and 114cm Selfie Stick (23mm shaft) and the 100cm Selfie Stick (25mm shaft). Pick your stick model at checkout — we map it to the correct bore automatically.

Do I need to know my ski pole's diameter?

No. Every order includes the full 14mm/16mm/18mm ring and shim kit, so nothing to select at checkout. We do recommend measuring your pole (diameter, or circumference ÷ π) just to confirm it's within range before you order.

How do I know which ring to use?

Full step-by-step guide with photos, including how to seat a shim for a snug fit. Same content whether you're deciding before you buy or fitting it on the mountain.

What if a part breaks or goes missing?

Replacement rings and shims are sold separately — sold individually, not bundled into a checkout add-on. See spare parts →

Warranty

Warranty terms — placeholder, to be finalized with legal review.

$1.99Buy now